Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable. Round finished edge on >2mm models from 2004, meeting the standards for the german TÜV. Edge trim is not necessary. Available windscreens type Z-RACING and R-RACER according to models.
The Z-RACING windscreens have been tested through our virtual wind tunnel and improve the aerodynamic coefficient and wind protection on an upright position with a 12.7% average compared to the original. And a 61% average on a racing position.
The windscreens R-RACER have been tested through the wind tunnel and developed jointly with World SBK and Resistance racing teams in order to achieve a perfect balance between wind protection and aerodynamic coefficient improvement.
Aerodynamic tests are supplied with most of our windscreens.
Windscreen made of acrylic of high impact between 3mm or 4mm thick depending on models. Its superior height improves protection and rider comfort.
Aerodynamic studies sheets are delivered with most of our windscreen.
Touring windscreen that incorporates a multi-adjustable visor that allows to vary the effect of the wind on the rider. The multi-adjustable visor is fixed with screws. The touring windscreen is already delivered with holes so that the user has to only attach the multi-adjustable visor to the windscreen.
We do not have touring windscreens with visor for all the models we produce touring windscreens for. Our windscreens with visor are only available in light smoke color.
Two mounting instructions sheets are supplied, the mounting of the touring screen if applicable, and the multi-adjustable visor.
PUIG offers two windshield reinforcement supports for two motorcycles models
The reinforcement support for the BMW R1200GS LC windshield (part# 7566N) provides a better subjection of the windshield avoiding vibrations and improving rigidity while allowing moving the windshield up and down at any time without having to remove it or loosen it.
With this support the rider will perceive less vibrations on the windshield, on the OEM or any of the PUIG windshields for this bike, and at any position.
The reinforcement support for the HONDA CRF1000L Africa Twin (part# 9154N) provides more rigidity to the windshield, either to the OEM or PUIG windshields, required for irregular terrains and offroad riding. At the same time, it offers the possibility to move the screen 80mm higher to improve the rider's protection.