Putt Turn Lights

Putt Turn Lights

Give your bike a sporty touch and personalize it with the new Puig Open Universal turn signals. Approved indicators, with black housing and transparent glass (62,8x15,4mm), have the particularity of LED lights. The piece is approved and contains E-mark Certificaction . Turn signal function.

Technical Info Turn Signals Connections:
Most of the bikes use bi-metallic relays. Its frequency (which is the one that sets the pace of the turn signals) depend on the amperage circulating through the circuit. When replacing the turn signals from OEM to aftermarket ones which carry a difference power, consequently they vary the amperage circulation through the circuit that causes a change on the frequency of the turn signals rhythm. If otherwise, the motorcycle uses electronic relay (which frequency works independently from the amperage circulating through the circuit) the change of turn signals from OEM to aftermarket, should not affect the frequency of the turn signals rhythm.

· Note: In case of doubt of what type of relay the motorcycle uses, we recommend to check the turn signal rhythm after switching form OEM to aftermarket.

If the OEM turn signals are replaced by aftermarket ones that use incandescent bulbs, we need to check they use the same power. In case it is different, we need to replace the turn signals bulbs for others that use the same power as OEM ones. On our catalog, we have available bulbs of different power.
If the OEM turn signals are replaced by LED ones (of much less power than incandescent bulbs), we have two options to balance the frequency of rhythm:

1. Incorporate a parallel relay in the right circuit and the other on the left curcuit. If we replace four turn signals, we need to use a resistance Part# 4298O. If otherwise, only two turn signals are replaced (one on each side), we need to use a resistance Part# 4298O. The resistances are supplied with a scheme for a parallel connection.
· Note: On most of the bikes, the warning function of the bike is disabled if the resistance is used.

2. Identify the intermittent relay of the motorcycle (location and number of pins) and replace it for its corresponding from the list supplied on most of the bikes, the warning functions work correctly when the relay is replaced.
· Note: we can find some motorcycles in the market that do not have an intermittent relay, obviously in this case it cannot be replaced. Moreover, if on the blinking function intervenes more than one relay, it is possible that replacing only one relay does not solve the problem.

Check availability of this product

Adapters for Putt Turn Lights of Universal Universal Universal

Installation of Front Turn Signals

Wiring with connector OEM
Cable length: 300mm

  • Black REF. 4854N Under development

Installation of Front Turn Signals

Wiring with connector OEM
Cable length: 300mm

  • Black REF. 3703N Under development

  • Black REF. 3704N Under development

  • Black REF. 3871N Under development

  • Black REF. 3890N Under development

  • Black REF. 3891N Under development

  • Black REF. 4856N Under development

  • Black REF. 4860N Under development

  • Black REF. 4863N Under development

  • Black REF. 4869N Under development

  • Black REF. 9772N Under development

  • Black REF. 20545N Under development

  • Black REF. 20591N Under development

  • Black REF. 20627N Under development

  • Black REF. 20760N Under development

  • Black REF. 20791N Under development

License support light grup instalation

For Yamaha models

  • Black REF. 3849N Under development

Turn signal extension

HARLEY DAVIDSON MODELS

  • Black REF. 3889N Under development

Turn signal extension

HONDA MODELS

  • Black REF. 3873N Under development

Turn signal extension

HONDA MODELS
110mm set it is delivered

  • Black REF. 8510N Under development

Installation of Rear Turn Signals

Wiring with connector OEM
Cable length: 300mm

  • Black REF. 3703N Under development

  • Black REF. 3704N Under development

  • Black REF. 3871N Under development

  • Black REF. 3889N Under development

  • Black REF. 3890N Under development

  • Black REF. 3891N Under development

  • Black REF. 4854N Under development

  • Black REF. 4856N Under development

  • Black REF. 4860N Under development

  • Black REF. 4863N Under development

  • Black REF. 4869N Under development

  • Black REF. 8510N Under development

  • Black REF. 9772N Under development

  • Black REF. 20545N Under development

  • Black REF. 20591N Under development

  • Black REF. 20627N Under development

  • Black REF. 20760N Under development

  • Black REF. 20791N Under development

Turn signals extension: front and rear

Tested on:
-CB500F 19'-20'
-CBR500R 19'-20'
-CBR650R 19'-20'
-CRF1100L Africa Twin 20'
-CB650R Neo Sports Cafe 19'-20' (REAR ONLY)
-CBR1000R Neo Sports Cafe 19'-20' (REAR ONLY)

180mm set it is delivered

  • Black REF. 4854N Under development

Turn signal extension

SUZUKI MDOELS
Set it is delivered

  • Black REF. 3164N Under development

Turn signal extension

YAMAHA MODELS

  • Black REF. 3888N Under development

Turn signal extension

BMW MODELS

  • Black REF. 3871N Under development

Technical features

  • DIMENSIONS

WHERE FIND THIS PRODUCT

Find our closest distributor