House Turn Lights

House Turn Lights for motorcycle Kawasaki Z900 2021

Renew the front turn signals of your motorcycle with the new House lights from Puig. Indicators approved with clear LED glass (70x24mm) and black housing. Intermittent function. Certificate of approval E-mark certification.

Technical information

It should be noted that most motorcycles use bimetallic relays, so their frequency depends directly on the amperage that circulates through the circuit. When replacing them, this amperage varies and therefore so does the frequency of blinking also.
In case of using electronic relays, whose frequency does not depend on the amperage, it should not affect the blinking.
In case we have doubts about the relay that comes with our motorcycle, it is advisable to mount the indicator and check the frequency.
The intermittent bulb should also be taken into account, in case the bulb's power varies we must replace it with one of the same power and can be found in our catalog.
If our choice is to use an LED bulb, there are two options to balance the blink frequency:

  1. One resistance must be incorporated in parallel in the circuit of the right side and another one in the left side. In the case of replacing the 4 flashers, the resistance Ref. 42980 must be used, but if only two are replaced, the resistance Ref. 58730 must be used.
  2. Identify the relay of the motorcycle's intermittence (location and number of pins) and replace it with the one that corresponds to the list that Puig offers.

In the market there are some motorcycles that do not have a specific relay, which makes it impossible to replace them. It should also be taken into account that if more than one relay intervenes in the intermittence action, replacing only one will not solve the problem.

Check availability of this product

House Turn Lights For Kawasaki Z900 2021


Set black clear lenses led 61,70 x 23,70mm.
Threaded bolt M10x1.25

Adapters for House Turn Lights of Kawasaki Z900 2021

Installation of Front Turn Signals

Wiring with connector OEM
Cable length: 300mm

  • Black REF. 3703N Under development

Installation of License Support Lighting

Wiring with connector OEM
Cable length: 300mm

  • Black REF. 20312N Under development

Support cover attachment for turn signals

  • Black REF. 5329N Under development

Installation of Rear Turn Signals

Wiring with connector OEM
Cable length: 300mm

  • Black REF. 3703N Under development

Technical features



Find our closest distributor